I drill mine need a sharp bit and don't force it. Use the cracked one to practice on. Buy a brand new bit if you don't have a sharp one.



Another thing that helps is to back up the plastic. clamp a 2x4 to a table /bench etc. drill through the plastic into the wood.
-----
Thanks,



Dave "Rainbows-R-Us"



0.1 Wife (WC)

0.2 kids (CBB)

4.12 Brazilian Rainbow Boa

2.1 Hypomelanistic BRB

0.1 Het for Hypomelanistic BRB

0.1 BCI "Elvira" normal from 1989

1.0 BCI albino / het-anery

0.1 BCI Hypo / het-albino

0.1 BCI Anery / het-albino

0.1 BCI Hypo (possible super)

1.0 BCI albino het stripe

1.0 BCI salmon hypo

0.1 BCI ghost



lots.lots.lots feeder mice and rats

[ Hide Replies ]

• Putting holes in plastic enclosures - LauraV, Tue Mar 21 16:52:25 2006
• RE: Putting holes in plastic enclosures - CBH, Tue Mar 21 16:56:33 2006
• Actually neither , it's - LauraV, Tue Mar 21 17:04:39 2006
• RE: Actually neither , it's - CBH, Tue Mar 21 17:08:48 2006
• RE: Actually neither , it's - rainbowsrus, Tue Mar 21 17:09:27 2006
• It is feet... - LauraV, Tue Mar 21 17:14:38 2006
• Oops - LauraV, Tue Mar 21 17:16:09 2006
• Yeah, I was thinking - rainbowsrus, Wed Mar 22 00:11:39 2006
• RE: Actually neither , it's - Randall_Turner, Tue Mar 21 17:10:19 2006
• RE: Putting holes in plastic enclosures - rainbowsrus, Tue Mar 21 17:06:39 2006
• Thank you everyone. - LauraV, Tue Mar 21 17:18:30 2006
• RE: Putting holes in plastic enclosures - scaleman, Tue Mar 21 17:21:04 2006
• RE: Putting holes in plastic enclosures - ajfreptiles, Tue Mar 21 18:28:09 2006
• You are not kidding - LauraV, Tue Mar 21 18:42:25 2006
• RE: You are not kidding - ajfreptiles, Tue Mar 21 19:02:29 2006
• I usually heat up a metal rod - vcaruso15, Tue Mar 21 20:52:19 2006
• RE: a soldering iron... - cbreps, Wed Mar 22 08:38:38 2006