I tried to support the plastic and didn't press hard with the drill, but I must admit my bit is old.



I don't have a proper set up or table for more intensive tool work, as I am not much of a builder.



So, I will assume my soldering iron was too cheaply made and find a more expensive one. It is much easier to work than a drill is anyway. At least for me.
-----


Delusions of Grandeur feed the EGO...

[ Hide Replies ]

• Putting holes in plastic enclosures - LauraV, Tue Mar 21 16:52:25 2006
• RE: Putting holes in plastic enclosures - CBH, Tue Mar 21 16:56:33 2006
• Actually neither , it's - LauraV, Tue Mar 21 17:04:39 2006
• RE: Actually neither , it's - CBH, Tue Mar 21 17:08:48 2006
• RE: Actually neither , it's - rainbowsrus, Tue Mar 21 17:09:27 2006
• It is feet... - LauraV, Tue Mar 21 17:14:38 2006
• Oops - LauraV, Tue Mar 21 17:16:09 2006
• Yeah, I was thinking - rainbowsrus, Wed Mar 22 00:11:39 2006
• RE: Actually neither , it's - Randall_Turner, Tue Mar 21 17:10:19 2006
• RE: Putting holes in plastic enclosures - rainbowsrus, Tue Mar 21 17:06:39 2006
• Thank you everyone. - LauraV, Tue Mar 21 17:18:30 2006
• RE: Putting holes in plastic enclosures - scaleman, Tue Mar 21 17:21:04 2006
• RE: Putting holes in plastic enclosures - ajfreptiles, Tue Mar 21 18:28:09 2006
• You are not kidding - LauraV, Tue Mar 21 18:42:25 2006
• RE: You are not kidding - ajfreptiles, Tue Mar 21 19:02:29 2006
• I usually heat up a metal rod - vcaruso15, Tue Mar 21 20:52:19 2006
• RE: a soldering iron... - cbreps, Wed Mar 22 08:38:38 2006