I used a kitchen cabinet kit from home depot. I had to make a back and top for it (I'm assuming the fixture was meant to be against a wall with a countertop going over it) It's melamine so it is somewhat heavy. For heating I used two pieces heat tape (3'L x 12" W) plugged into a helix. The only insulation I used was filling in the cracks with silicone and filling in the gaps around the door with weather strip. It holds perfect temps and does not fluctuate at all. The only thing I might change going into this season is adding another shelf.



-----
Jon F

[ Hide Replies ]

• incubators - pichereptiles, Thu Sep 14 03:32:15 2006
• RE: incubators - HTDesigns, Thu Sep 14 08:59:47 2006
• RE: incubators - methistina, Thu Sep 14 09:02:53 2006
• RE: incubators - coldbloodaddict, Thu Sep 14 11:22:31 2006
• RE: incubators - salemserpent, Thu Sep 14 21:33:58 2006
• RE: incubators - xXVanXx, Thu Sep 14 22:25:37 2006
• RE: incubators - hoot, Thu Sep 14 23:10:45 2006
• RE: incubators - dsreptiel, Thu Sep 14 23:32:41 2006
• RE: incubators - dsreptiel, Thu Sep 14 23:35:02 2006
• RE: incubators - alicecobb, Fri Sep 15 04:49:18 2006
• RE: incubators - hoot, Fri Sep 15 08:54:11 2006
• RE: incubators - alicecobb, Sat Sep 16 03:58:01 2006
• RE: incubators - salemserpent, Fri Sep 15 08:38:36 2006
• RE: incubators - hoot, Fri Sep 15 08:55:32 2006
• RE: incubators - jonf, Thu Sep 14 22:39:21 2006
• RE: incubators - dsreptiel, Fri Sep 15 00:22:34 2006
• RE: incubators - salemserpent, Fri Sep 15 08:40:49 2006
• RE: incubators - jonf, Sun Sep 17 15:55:56 2006
• Look at my post under no substrate methd - midnightherps, Fri Sep 15 19:12:15 2006