Posted by:
AFR
at Sat Jul 7 09:55:37 2007 [ Email Message ] [ Show All Posts by AFR ]
I have 1 computer fan 3"x3".
The fan is 6" above the heat tape.
The temp is 89 from top to bottom.
The heat tape is plug in to the helix and the helix is plug into the ronco. I run the helix at 89 degrees and the ronco at 90 degrees, if the helix fails for some reason the ronco will turn it off if it goes above 90 degrees.
I had to play around with the position of the fan to get the results I wanted.
Good luck. ----- Adrian
Designer Ball Pythons
www.designerballpythons.com
[ Hide Replies ]
|