Just wanted some feedback on a couple options for putting a divider into a 36 inch neo to house a hatchling black rat snake and a hatchling somethin-er-other to be purchased at a show in the near future (probably a sinoloan, but not sure).



1. Plexiglass held in place with epoxy



or



2. 1/2 inch MDF or plywood held in place with screws and any gaps filled with silicone.



To deal with the gap between the door and the sliding glass I was considering putting some sort of weather stripping on it that will give enough to slide the glass across it, but firm enough that the snake could not push its nose through. This will only be a precaution hopefully, because I am pretty sure I can get the fit close enough that any gap will be negligible even for a hatchling, but especially once I had yearlings in there. Thanks for any and all replies, and anyone with pictures of how they may have solved a similar problem would be greatly appreciated.

[ Show Entire Thread ]