Get the 150 watt halogen bulb and then get a lamp dimmer. Zoo Med sells a relatively cheap one that will work for up to a 150 watt bulb. I'll try to put a link to it.



I have a 100 watt bulb in my beardie's tank, but sometimes that gets too hot, so I have this really nice dimmer I had gotten from the local reptile place when I bought his first setup.



Hope this helps. If you have a clamp lamp you could get a lamp stand and adjust the height to adjust the temperatures, but those are mainly intended for mercury vapor bulbs. When I used to have a standard aquarium (now I have a specialized one) I used a lamp stand and a dimmer. The dimmer was what I used to control the temperature most of the time, but the lamp stand was really convenient because it was a good place for the light to be when I needed to get in the tank, instead of having to set the lamp somewhere or clamp it on something.



Here's the link to the thing I'm talking about. I guess they have one that can handle 500 watts now too:
Here

[ Hide Replies ]

• Mercury Vapour and Halogen bulbs... - dragonlord69, Mon Dec 29 14:27:48 2003
• RE: Mercury Vapour and Halogen bulbs... - dragonlord69, Mon Dec 29 14:30:47 2003
• Here's the best solution I see.... - -ryan-, Mon Dec 29 15:29:54 2003
• RE: Here's the best solution I see.... - dragonlord69, Mon Dec 29 15:37:45 2003
• RE: Mercury Vapour and Halogen bulbs... - figuerres, Mon Dec 29 15:50:13 2003
• RE: Mercury Vapour and Halogen bulbs... - dragonlord69, Mon Dec 29 16:05:46 2003