I’ve tried a lot of different types of misting setups, from the habba mist to trying to spray by hand and using water pumps going to a spray nozzle. All of these sucked. What I finally did was use a sprinkler setup with my chameleon setup. With this I don’t ever have to refill anything, all u gotta do is set when u want it to go off and for how long.



Tools/supplys: all these can be bought from Home Depot

-Pvc cement glue(

-Pvc primer(

-Teflon tape($0.69-$0.99)

-3/4” pvc pipe( $2)

-3/4” water valve($10-$15) by Orbit

-Sprinkler timer($20) four station by Orbit

-Mister($15)

-Pvc connecters (always around $0.30)

-Water hose(if needed, $5- 15ft., $10-25ft.)

-Monkey wrench

-Hand saw( to cut pvc)



this whole entire setup should cost u about $65, that’s if u have to buy all the supplies but most people already have the hose, and maybe even the pvc primer and cement glue.



The first thing I did was cut a piece of pvc to go to the water faucet outside. For this u need to get a ¾” female connector (threading on the inside)so u can connect it to the faucet. If u want to spend a little more money, buy the connectors($1) that twist, so that when u connect the pvc to the faucet that the whole pvc doesn’t move but just the connector(like some hoses have) Use the primer at the end of ur pvc and let it dry, then add the cement glue and add the connector, make sure its on all the way so u don’t have any leaks. Add any elbows that u may need so that ur pvc becomes level with the ground so when u add the valve to it, it’s level to the ground also. (I have a spliter on the faucet so that im not using it just for my setup)Continuation on reply post…

-----
1.0. Vield Chameleon(Jessy James)

1.1.3 Sugar gliders(Bonnie & Clyde)

2.0 Ferrets(Butch & Sundance)

1.1.3 Parakeets(Prettyboy,Sassy)

1.0 Doberman (Aries)

1.1 Cats(Riley, Zoe)

[ Show Entire Thread ]