Posted by:
John_Smith
at Sat Feb 21 00:46:00 2004 [ Email Message ] [ Show All Posts by John_Smith ]
At the end of the pvc, the one going to the valve ur gonna need to have a ¾” male connector ( threads on outside) and add the Teflon tape to it before twisting into the valve. If u can, try to put the valve near a plug so that ur valve will be connected to the timer and the timer is near a outlet. Of course u can always buy longer wiring. Make sure that the pvc is very tight on that valve so there will be no leaks, that is what the wrench is for. Hold the valve and twist the pvc. After the valve is attached, get another small piece of pvc and add a connector to each side. On side will need a male connector to go to the valve and the other will need a female to go to the end of a hose. After all the pvc piping is connected to the valve go ahead and connect the pvc to the faucet outside. This is when the twist connector comes in handy right now. So that the connector move and not all the pvc pipe and the valve. ……..
-----
1.0. Vield Chameleon(Jessy James)
1.1.3 Sugar gliders(Bonnie & Clyde)
2.0 Ferrets(Butch & Sundance)
1.1.3 Parakeets(Prettyboy,Sassy)
1.0 Doberman (Aries)
1.1 Cats(Riley, Zoe)
[ Hide Replies ]
- Chameleon misting setup - John_Smith, Sat Feb 21 00:44:22 2004
 posting as replies so i can show more pics and give details about - John_Smith, Sat Feb 21 00:46:00 2004
|
