Posted by:
junglehabitats
at Mon Oct 25 11:16:58 2004 [ Email Message ] [ Show All Posts by junglehabitats ]
Hey guys Burma reading your post made me think of something i have used alot of but not in about a yr since closing my company.
I use to use a product that was from HomeDepot made by Behr it was called Build 50.This was a two part mixture andcame in quart cans you mix them together and it goes on self leveling and can also be heated with a hair dryer to make it flow out even better. This product is made for high traffic use applications on Bartops and table tops etc.I used on several Bartops in Bars. It goes on thick like a clear molasses and is equal to 50 coats ( give or take ) of polyurathane. it has a very good hardness to it when it is fully cured and will appear by looking into it that you could reach 2 ft deep in it lol .It was also nice because if cigerette burns were in it you could easily use steel wool or sandpaper and remove them because of the thickness it has.Now for persay monitor nails as was mentioned by chris i think this could be a plus possiblybecause you could easily sand to remove them if need and still have a *new* look to the finish. Just thought i would mention it this kit was around $35 or so dollars if i remeber correctly.
-----
www.cheapcages.com
Visit the new website while the Jungle gets made over.
[ Hide Replies ]
|
Wood coverings / clear - junglehabitats, Mon Oct 25 11:16:58 2004