Posted by:
dmac
at Mon Oct 25 19:50:43 2004 [ Email Message ] [ Show All Posts by dmac ]
90x24x171/2", (2)11x29" Ultratherms on left side underneath linoleum controlled by A-life therm (95 degrees,)3/8" air gap on bottom of cage doors. Joints sealed with aquarium sealant and wood sealed with spar urethane. If I had to do it again, I wouldn't use the spar for the inside, but I think she'll be fine-since this pic I have drilled 20 3/16" holes in the upper right side for more ventilation which I'll cover when she's in shed. I'd say the whole project cost me around 375 dollars, but could be done for a whole lot cheaper if you use cheaper plywood and sand more, and get linoleum from scrap from somewhere (linoleum killed me at Home Depot-50 bucks.)Took me about a month. Wife unit is glad to have her car back in the garage.
[ Show Entire Thread ]
|
