Steve,



Is the edge of the glass properly beveled and polished? You might take it back to the shop and have them do that to the lower edge that will run in the track. If don't want to have to pay attention to how the glass goes in the track then have both of the edges polished.



You can do this yourself. I can't recall the grit of sandpaper, though. I also used a polishing wheel on my rotary tool. Try google if you want to DIY.



But I also either rub silicone or Teflon spray into the track. This does wonders and lasts a long, long time. I have not done it in a couple of years and my glass is still running smooth.



I use a silicone spray from a company called Blaster Chemical. They have several times the amount of silicone of some of the cheaper sprays.
-----
Current snakes:



0.2 Gonyosoma oxycephala - (Silver/Yellow)



3.3 Gonyosoma oxycephala - (Green)



2.1 Gonyosoma janseni - (Black)



3.3 Gonyosoma janseni - (Black & Tan)

[ Show Entire Thread ]