Posted by:
Antegy
at Mon Oct 24 12:12:00 2005 [ Email Message ] [ Show All Posts by Antegy ]
Hi everyone,
As some of you know, I'm in the process of setting up a new enclosure for my burm (a male, who is now almost 13'). To be sure I make good choices on the design plans for his new home I do a lot of reading here and there of what other peoples' experiences are with caging. Here's a couple things I'm curious about:
1) "Holding humidity in a cage" - This seems a bit odd to me. It seems to me that to do so one must also hold the 'air' in the cage, since the moisture is in the air. This doesn't sound like a good idea to me. Think about how much we, people, dislike stuffy rooms full of stale air. Think about how bad that would be if you, or someone, left a huge pile of feces and urine in the corner and you had to wait until your 'owner' came home from work to clean it out. Talk about wanting some fresh air.
I have flexable exhaust tubing connected to my burms Vision cage. The other end of the tubing is connected to an exhaust fan about six feet away that runs continuously, all the while pulling air from the room, into and through his cage, then out the window through another short length of flexable tubing. A gentle, steady stream of fresh air for him. Sounds good to me. And to compensate for the loss of 'humid' air, I run a humidifier in the room, and on top of that I have a misting system in his cage that runs on a timer to boost the humidity in just his cage (I also have other snakes housed in the room who don't require such high humidity levels). He lives in about 60-70% RH normally, which I boost around shedding time to help ensure a good shed. I don't have much of any problem maintaining humidity this way, aside from having to remember to refill the humidifier every now and again.
2) I've been looking at all different manufacturers caging options to see what might be best. I have to say, most all of them, in my opinion, amount to what looks to me like a casket with a couple of small locking windows. Even the Vision cage I have him in seems a bit on the 'gloomy' side, even though it does seem to have the largest 'viewing area' of most cage options out there.
For his next cage, the manufacturer I'm probably going to go with offers clear acrylic walls all the way around, and all mounted on a slim framing system (I won't mention thier name, as I don't intend this to be a commercial advertisemtment for them). This seems great to me - he gets a lot of natural light, very little of a 'boxy' feeling, and I get a huge 'viewing area'. And for 'privacy' I'll still offer him a hide box of some sort.
I'm sure there are a number of assumptions I'm making and things that I'm overlooking - so please, let me know what you think and any comments you have on this.
Thanks very much,
- Mark
.
-----
.
-------------------------------------------------------------
My personal website: www.antegy.com
-------------------------------------------------------------
My Kingsnake.com Picture Galleries
- 1.0.0 Labyrinth Burmese Python Gallery
- 0.1.0 Suriname Boa Gallery
- 0.1.0 Mexican Black Kingsnake Gallery
- 1.0.0 Pueblan Milksnake Gallery
- 0.1.0 Trinket Ratsnake Gallery
-------------------------------------------------------------
My photography on photo.net
-------------------------------------------------------------
My photography on modelmayhem.com
-------------------------------------------------------------
Me on myspace.com
[ Hide Replies ]
 A couple thoughts on the basics of caging.. (please comment) - Antegy, Mon Oct 24 12:12:00 2005
|
