After having some serious space issues for my hatchlings this past season, and seeing the adjustable rack idea, I was inspired to build my own rack. It was surprisingly easy to do and cost around $300.

First step was to purchase supplies:



I decided to go with 5/8" All Thread for stability. I found 6 foot lengths at Lowe's. The shelves were Rubbermaid 16" x 36" pre-made melamine shelves...about $8 each. I also needed 2" casters, some wood screws and some 5/8" hex nuts and flat washers.

Then it was simply a matter of measuring where to drill the holes. They were 3.5" from the front and rear, and 1" from the sides to acomodate the casters.



I then drilled the holes, using the first shelf as a template for all the rest:



Then I installed the casters with wood screws:



And attached the All Thread to the bottom shelf:



From there I was ready to start stacking on the shelves:



The biggest time consumer was threading the hex nuts down the entire length of the All Thread. Thankfully, that job got easier with each shelf!

I decided to run heat cable across the back with eye hooks to act as a backstop rather than using a router and installing it in a groove as belly heat. This pic is courtesy of John Lassiter to illustrate what I did also:



I ended up with a finished rack that was 13 levels high with 4 Sterilite shoeboxes on each level...a total of 52 slots!



Combine that with my existing hatchling rack with 28 slots and I now have a nice 80 slot capacity for next season. To me, a very nice, easy and necessary addition to my snake room:



Thanks to those who inspired me. If you want to build your own and have questions I will be happy help any way I can. I feel like it is my duty to pass the inspiration forward! I hope my post was both interesting and informative. Thanks for looking.
-----
God Bless Evolution.

[ Show Entire Thread ]